- The iFill unit can be placed and used virtually
anywhere in the home, minimizing the noise and
disruption to daily life.
- Partially filled cylinders can be easily topped
off.
- Simple push-button set up
- Safe and easy to use
- Automatically shuts off when filling is
complete.
- Includes easy-roll casters that make it easy to
move and store the unit when not in use.
- Provides the flexibility to fill most cylinder
sizes including M4,M6,ML6,C,D and E.
- Intuitive operation with instructions printed on
the unit in English, French and Spanish.
- 90 Day Warranty
Quick Specs:
Output: 93% 02 ± 3%
Width: 12.25 inches
Height: 28.5 inches
Depth: 22.5 inches
Weight: 66 lbs.
The chart below reflects the number of
hours an oxygen-filled cylinder will last when used with
a PulseDose Conserving Device or a Continuous Flow
Regulator. Note: All ambulatory
ranges are calculated assuming a breath rate of 20
breaths per minute in PulseDose (PD) mode.
|
Delivered
Volume cc’s
|
16.5
|
24.75
|
33
|
41.25
|
49.5
|
66
|
82.5
|
99
|
|
|
Flow Rate:
|
1
|
1.5
|
2
|
2.5
|
3
|
4
|
5
|
6
|
Mode
|
|
ML6 Cylinder
|
2.8
8.6
|
1.9
5.7
|
1.4
4.3
|
1.1
3.4
|
0.9
2.9
|
0.7
2.1
|
0.6
1.7
|
0.5
1.4
|
CF
PD
|
|
C Cylinder
|
4.0
12.1
|
2.7
8.1
|
2.0
6.1
|
1.6
4.9
|
1.3
4.0
|
1.0
3.0
|
0.8
2.4
|
0.7
2.0
|
CF
PD
|
|
D Cylinder
|
6.9
21.0
|
4.6
14.0
|
3.5
10.5
|
2.8
8.4
|
2.3
7.0
|
1.7
5.2
|
1.4
4.2
|
1.2
3.5
|
CF
PD
|
|
E Cylinder
|
11.4
34.4
|
7.6
23.0
|
5.7
17.2
|
4.6
13.8
|
3.8
11.5
|
2.8
8.6
|
2.3
6.9
|
1.9
5.8
|
CF
PD
|
Why do I hear oxygen escaping from the fill
connector after removing the cylinder? Is this safe?
Yes, this is perfectly safe. In order to provide the
ability to “top off” cylinders and make the connection
easy, the trapped pressure must be allowed to bleed off.
Can I operate the iFill in a cupboard / wardrobe
/ closet?
No. There is not enough air flow in a cupboard. However,
the iFill may be stored in a cupboard when not in use.
Can I stop filling a cylinder before it is
completely full?
Yes, the cylinder can be removed at any time during the
filling process. A partially filled cylinder can be
re-attached to the iFill unit and “topped off”.
Can I fill cylinders at night while I sleep?
Yes. Simply connect the cylinder and press start. Once
the iFill completes the fill process, it will stop
automatically and go into standby mode.
How often should the two gross filters be
cleaned?
Once a week. Wash in warm soapy water and rinse
thoroughly.
Can I use any kind of cylinder with the iFill?
No. The iFill cylinders must be used with the iFill as
they have a proprietary connection that makes other
cylinders incompatible.
How long does it take to fill the iFill
cylinders?
Please see the downloadable brochure for the approximate
fill times, please note that fill times may vary
depending on environmental conditions, such as altitude.
