Filling your needs
UltraFill is an advanced home oxygen
system that combines a stationary oxygen
concentrator, filling station, and
high-capacity 3,000 PSI cylinders to
meet the needs of a wide range of oxygen
patients, including those who are highly
active or require continuous flow
oxygen. UltraFill also has the needs of
homecare providers in mind with features
intended to save money by using existing
inventory and lowering operating costs.
3,000 PSI Cylinder Advantage
Long-lasting 3,000 PSI cylinders provide high-usage
oxygen patients with >40 percent more oxygen than
similar sized 2,000 PSI cylinders.Provider benefits
UltraFill's unique design and high capacity 3,000 PSI
cylinders provide a number of ways to reduce your costs
while offering patients the superior oxygen duration and
convenience of the UltraFill home oxygen system. Since
3,000 PSI cylinders last longer than traditional 2,000
PSI cylinders, oxygen patients will require fewer
cylinders. Plus, the UltraFill system generates oxygen
and fills cylinders right in the home, eliminating
recurrent oxygen deliveries.
- Use your
current CGA-870 compatible OCD/regulator
inventory
- Upgrade your
existing EverFlo, Millennium M600 and
M605, and Millennium M10 concentrator
inventory
UltraFill's low-maintenance design enables homecare
providers to lower service costs for additional savings.
Also, UltraFill's intuitive design is easy for oxygen
patients to use – which means fewer service calls.
Patient-friendly design
- One-handed
cylinder connect/disconnect
- Auto detection
of 3,000/2,000 PSI cylinders
- Patient can
stop and restart filling at their
convenience
- 50% quieter
than the competition
- Cylinders can
be topped off to make partial fills
- Uses 40% less
power than the competition
- Fill level
indicator monitors cylinder fill level
- Fill cylinder
while OCD or regulator is attached
The benefits are continuous
Another convenience of the UltraFill home oxygen
system is that it allows oxygen patients the ability to
fill tanks and receive oxygen therapy simultaneously.
Unlike other oxygen generating systems, there is no need
for the patient to switch to another device during the
filling process.*
* When filling, 3 LPM of oxygen is available with a 5
liter concentrator (EverFlo and Millennium) and up to 7
LPM is available with a 10 liter concentrator
(Millennium M10).
System specifications
|
Dimensions (l x w x h): |
9" x 20" x 25.5" (229 mm
x 508 mm x 648 mm) |
|
Weight: |
45 lbs (20.4 kgs) |
|
Sound level: |
44 dBA |
|
Power consumption: |
110 watts |
|
Cylinder type: |
2,000 and 3,000 PSI* |
|
Typical filling time: |
M6* (2,000 PSI), 1 hr 5
min
MB08* (3,000 PSI), 1 hr
45 min |
Typical use time
(4.5:1 CSR, setting of 2
at 20 breaths per
minute): |
M6* (2,000 PSI), 5 hr 33
min
MB08* (3,000 PSI), 8 hr
40 min |
|
OCD/regulator type: |
CGA-870 connection |
|
Patient flow while
filling: |
Up to 3 LPM with EverFlo,
M600, and M605
Up to 7 LPM with
Millennium M10 |
|
Compatible
concentrators: |
EverFlo, EverFlo Q,
M600, and M605, and M10 |
|
Oxygen concentration: |
93% (+/- 3%) |
|
Storage/transport
humidity: |
15 to 95% non-condensing |
|
